|
|
Build Your Online Product Catalogs?
| Product Name: |
PC injection screw barrels
|
| Supply Ability: |
1000 pcs |
| Related proudcts |
alloy screw barrels, twin screw barrels, bimetallic screws, |
| Specifications |
Screw diameter: Ø12-300MM L/D:15-55 |
| Price Term: |
FOB,CNF,CIF,EXW,etc |
| Port of loading: |
Ningbo |
| Minimum Order |
1 pcs |
| Unit Price: |
FOB USD368/pc |
|
PC injection screw barrels
Specification
Screw diameter: Ø12-300MM L/D:18-24
Barrel diameter: Ø25-500MM Length:300-1000MM
Material
38CrMoAlA(JIS SACM645)
Cr12MOV(JIS SKD-11)
4Cr5MoSiV1(JIS SKD-61)
42CrMo(AISI 4140)
9Cr18MoV
Stainless steel,etc.
Parameter
Nitrided layer depth:0.50-0.80mm
Nitrided hardness: 900-1100HV
Nitrided brittleness: Less than 2 level
Surface roughness: Ra 0.4
Linearity of screw: 0.015mm
Feature
PC screw barrel is good for plasticizing,exhaust,molding due to PC's big melt viscosity.And to prevent enlarge the screw load,the screw's rotation speed couldn't too higher,general control in 30~70r/min.
When extruding PC products, PC material could not be used more than recycle three times,consumption should be around 20%.
So we need to choose single thread pitch,gradient compression type screw with check vavle.
length to diameter ratio L/D is 18~24,compression ratio C/R is 1.8~2.2.
|
| Company: |
Ningbo Xuhao Industry Co.,ltd
|
| Contact: |
Celia Hu |
| Address: |
Room 901,Building No.2, Lane 165, Yunxia Road, |
| Postcode: |
315012 |
| Tel: |
0086-15067430419 |
| Fax: |
86-574-82817230 |
| E-mail: |
|
|
|
|
Home
